Rheem 150 000 Btu Natural Gas Indoor Water Heater
T-H3J-DV-N - 160,000 BTU Natural Gas Indoor Condensing Ultra-Low NOx
T-H3J-DV-N (Indoor)
The T-H3J-DV-N series offers high efficiency Ultra-Low NOx condensing technology allowing for the use of 3" PVC venting and has 0" clearance to combustibles. Utilizing HRS35 copper alloy for the heat exchanger tubing. Indoor models are certified up to 10,100 ft. altitude.
Also referred to as T-H3J-IN-N
Number of showers this unit can handle, depending on ground water temperature.
Warmer Climates
Cooler Climates
- Overview
- Specifications
- Venting
- Accessories
- Literature
- Rebates
Overview
The T-H3J-DV-N supplies hot water to domestic hot water systems (directly or indirectly) which can be used with storage tanks, recirculation systems, hydronic heating systems, radiant floor systems, and/or domestic & heating applications.
The T-H3J is a high efficient, condensing tankless water heater perfect for residential applications. With gas inputs of 160,000 BTU, the T-H3J can produce enough hot water for two bathrooms in warmer climates or 1.5 baths in colder climates.
- ENERGY STAR® qualified
- 15-year limited heat exchanger, 5 yrs limited parts Residential use
- Primary heat exchanger utilizes commercial-grade copper alloy for 25 times better heat transfer than stainless steel
- Secondary heat exchanger utilizes 316L stainless steel for better corrosion resistance
- Complies with Ultra-Low NOx regulations of less than 14 ng/J (<20ppm)
- Integrated controls and power cord as standard features
- Venting with Schedule 40 PVC, CPVC, PP, Category III stainless steel
- Safety features include freeze, overheat, surge protection, and troubleshooting diagnostic codes
Tech Specs
Emissions: | Ultra Low NOx |
Maximum BTUs: | 160,000 |
Minimum BTUs: | 19,500 |
Water Connection Location: | Bottom |
Water Connection: | 0.75" |
Flow Rate: | 6.60 |
Heat Exchanger: | Copper & Stainless |
Voltage: | AC 120V |
UEF: | 0.94 |
ENERGY STAR® Qualified: | Yes |
LEED Rating: | 1.5 |
Remote Control: | No |
Technology: | Condensing |
Multilink: | No |
Dimensions & Venting
Height: | 22.50" |
Width: | 17.75" |
Depth: | 10.75" |
Product Weight: | 58 lbs. |
Vent Type: | Direct Vent |
Vent Size: | 4" |
Venting
9008847005 The 9008847005 Non-Return Valve is a must-have item for common venting system. It prevents the escape of combustion gas through non-operating appliances. For Use with the following models: T-H3J-IN, T-H3S-IN, T-H3-IN
Non-Return Valve
9007611005 The 9007611005 Concentric PVC Termination is used when terminating direct-vent (sealed combustion) systems, with Indoor models that require a 3 in. (76 mm) intake and a 3 in. (76 mm) exhaust. This concentric termination provides the convenience of only having to make one penetration through a sidewall instead of two separate penetrations for the intake and exhaust piping. The termination includes a bird screen, restricting small animals, pests, and foreign objects from entering into the vent system. For Use with the following models: T-H3M-IN,T-H3J-IN, T-H3S-IN, T-H3-IN
Concentric PVC Termination
Accessories
9008331005 The 9008331005 Pipe Cover protects the plumbing pipes to the water heater from unexpected adjustments. This pipe cover is fixed to the bottom of the water heater, which hides the plumbing and improves the visual aspects of the whole installation for the water heater. For Use with the following models: T-H3J-IN, T-H3J-OS, T-H3S-IN, T-H3S-OS, T-H3-IN, T-H3-OS
Pipe Cover
9008172005 The 9008172005 Temperature Remote Controller (TM-RE40) is designed for commercial tankless applications that require higher outlet temperatures. It also works as a diagnostic tool that will give a concise error code whenever there is a problem with the unit. For Use with the following models: T-H3-IN, T-H3-OS
Remote Temperature Controller
9007604005 The 9007604005 Lead Free Isolation Valves & Pressure Relief Valves are used to isolate a unit for service. The Pressure Relief Valve is to help protect the unit and release if the pressure in the tankless water heater or hot water system exceeds 150 psi and up to 200,000 BTUs. For 3/4" water lines. (1953 Compliant) For Use with the following models: TK-110C-NI, TK-310C-NI, TK-510C-NI, T-KJr2/U, T-K4/U, T-D2/U, T-H3M, T-H3J, T-H3S, T-H3
Lead Free Isolation Valves & Pressure Relief Valve
9007607005 The 9007607005 Neutralizer assembly neutralizes the condensate (acidic water) that forms in the secondary heat exchanger of the water heater. It connects to the condensate drain port of the water heater by using connectors included with the neutralizer kit. For Use with the following models: T-H3M-IN,T-H3M-OS, T-H3J-IN, T-H3J-OS, T-H3S-IN, T-H3S-OS, T-H3-IN, T-H3-OS
Neutralizer
9008847005 The 9008847005 Non-Return Valve is a must-have item for common venting system. It prevents the escape of combustion gas through non-operating appliances. For Use with the following models: T-H3J-IN, T-H3S-IN, T-H3-IN
Non-Return Valve
9008846005 The 9008846005 PVC Adapter for Common Venting. For Use with the following models: T-H3J-IN, T-H3S-IN, T-H3-IN
PVC Adapter
9007611005 The 9007611005 Concentric PVC Termination is used when terminating direct-vent (sealed combustion) systems, with Indoor models that require a 3 in. (76 mm) intake and a 3 in. (76 mm) exhaust. This concentric termination provides the convenience of only having to make one penetration through a sidewall instead of two separate penetrations for the intake and exhaust piping. The termination includes a bird screen, restricting small animals, pests, and foreign objects from entering into the vent system. For Use with the following models: T-H3M-IN,T-H3J-IN, T-H3S-IN, T-H3-IN
Concentric PVC Termination
Rheem 150 000 Btu Natural Gas Indoor Water Heater
Source: https://www.takagi.com/products/tankless-water-heaters/t-h3j-dv-n
0 Response to "Rheem 150 000 Btu Natural Gas Indoor Water Heater"
Post a Comment